Elektrokabel POLSKA PRODUKCJA / POLSCY PRODUCENCI PRZEWÓD LINKA LGY 1X2,5 2,5MM2 NIEBIESKI 1M METRY LGY 2,5 NIEBIESKI

Link wire

LgY 1x10 750V H07V-K brown

Symbol: LgY 1x10 mm2

Color: brown

LENGTH: 1 METER

EXAMPLE:

3 PIECES = 3 METERS OF WIRE

MAXIMUM LENGTH OF ONE SECTION:

100 M

Single-core wire without coating with a flexible core, generally used for permanent installation, with polwinit insulation.

Cross-sectional area of ​​the cores: 10mm2

Maximum diameter of a single wire in the core: 0.41mm

Nominal insulation thickness: 1.0mm

Approximate outer diameter of the wire: 6.0mm

Approximate weight of the wire: 109kg/km

Maximum core resistance at a temperature of 20°C: 1.91Ω/km

Min. insulation resistance at a temperature of 70°C: 0.0065MΩ/km

Single-core wires with polwinit insulation, for permanent installation

Cores: Soft single-core copper wires class 1 or multi-core class 2 non-densified or densified as well as flexible class 5 multi-core wires

according to PN-EN 60228

Insulation: Polwinit type TI1 or heat-resistant polwinit type TI3

Maximum temperature of the core during wire operation: 70°C

Minimum ambient temperature for wires laid permanently: -40°C

Minimum ambient temperature when laying wires: -5°C

Maximum temperature of the core during short circuit:

+160°C

Test voltage 50Hz: 2500V

Minimum bending radius Normal use 4 x D, carefully bent at the end 2 x D, D-outer diameter of the wire

Use:

Designed for installation in installation tubes mounted on the surface or embedded

For permanent protected installations inside or outside lighting or control devices

for AC voltage up to 1000V or DC voltage up to 750V relative to ground.

Symbols:

H07V-K - wire made according to the harmonized standard (H) for nominal voltage 450/750V (07), with polwinit insulation (V) with a flexible multi-core wire (K)